Rugged Industrial Media Converter, 堅固耐用的工業媒體(光電)轉換器 @ 鼎龍科技有限公司 AdapterNetworks

Rugged Industrial Media Converter, 堅固耐用的工業媒體(光電)轉換器

Rugged Industrial Media Converter, Wide range power input

18-36VAC/12-60VDC/or DC Jack, -40°C to +75°C

10/100M TX to 100M FX, SC MM 2km, smallest size on the planet. Designed to fit into outdoor CAM enclosure.

Key Features:

True Mini, rugged design enclosure 59x36x49mm (LxWxD)

Supports 18V-36VAC/12V-60VDC/ or DC Jack socket

Supports Link Fault Pass through (LFP) function

Supports switch model and converter mode.

Surge protection diodes on power input.

ESD protection diodes on RJ-45 port

Provides Far End Fault function on FX port.

Provides increased Noise Immunity

Extended environmental specification -40°C to 75°C

Introduction

This true mini, rugged Industrial media converter is designed for where critical but space-limited outdoor CAM enclosure. It can be powered by wide range of VAC , VDC or external DC power adapter . With its multi-purpose design, it can also be used for Din-Rail or wall-mounted. It is an ideal unit for IP surveillance, traffic monitoring and Security application in critical environment. It can tolerate -40°C to 75°C in harsh environment to perform a reliable network.

Specification

IEEE Standard	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3u 100Base-FX Fast Ethernet IEEE802.3x Flow Control and Back Pressure
IEEE Standard
Data Processing	Store and Forward
Flow Control:	IEEE 802.3x Flow Control and Back Pressure
Architecture	Full wire speed conversion, Transparent conversion to 802.1Q VLAN tagged packets.
MAC address Table Size	1K
Packet Buffer Size	1Mbits
Network Connector :	RJ-45 10/100M BaseT(X) Auto negotiation, Auto MDI/MDI-X function, Full/Half duplex Fiber ports: 100BaseFX SC, ST, SC SM 30km, SFP 100BaseX
LED indicators	Power, Speed, Link/Act Speed (TP port) Link/Act(TP and Fiber port)
DIP Switch	Link Fault Pass Through (LFP) Converter Mode, Switch Mode
Power protection	Surge protection diodes on power input
Connector protection	ESD protection diodes on TX port
Reserve polarity protection	Present
Overload current protection	Present
Power Input	18V-36VAC, 9V-60VDC, DC Jack terminal cable supported (DC Barrel Connector )
Conformance to UL Standards	Use Isolated power supply to conform with UL 508 standard
Power Consumption	Full Load: 1.92Watts at 48VDC
Removable Terminal Block	3 pin contact terminal block for power input Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm
Operating Temperature	-40℃~75℃
Operating Humidity	5% to 95% (Non-condensing)
Storage Temperature	-40℃~85℃
Housing Design	IP40 Design, high graded Aluminum
Case Dimension (W X D X H)	59x36x49mm (LxWxD)