鼎龍科技有限公司 AdapterNetworks

Tool free optical fiber connector named TF Splicer.

分類：機櫃網路線光纖Cabinet CableCat6 2009/11/10 09:00

Products

TF Splicer 0.25mm

"TF Splicer 0.25mm" is for outdoor use and the biggest market in Japan.

TF Splicer 0.9mm 

Release on spring of 2010

 "TF Splicer 0.9mm" is for indoor (In building) use. Compared with type of 0.25mm, clad diameter is the same, but size of 0.25mm is not convenient for installation work due to too thin insulation thickness.  This type market is glowing rapidly.

Multi type connector 

Release on spring of 2010

Multi type connector is applicable for connecting type 0.25mm one side and type 0.9mm the other side.

Contents of 50 pieces sample set

Contents of 50 pieces sample set

□   TF Splicer: 50 Pcs

□   Fixture for TF Splicer: 1Pc

Fixture for TF Splicer

This fixture makes it easier to connect optical fibers. ( One piece fixture is attached every 50 pieces )

Technical Information

 There are two methods for connecting Optical Fibers. One is “Fusion connecting method”, and the other is “Mechanical connecting method” using mechanical splice.

TF splicer is our original product for connecting Optical Fibers without using special tool.

1.   The special tool is unnecessary

      This brings big for Installer’s equipment investment reduction

2.   Easier connecting work

      Easier connecting work will bring dramatically quick recovery when disaster occurs.

3.   Higher durability

       TF Splicer will solve aged deterioration problems.

4.    Products cost is less than half of competitive products.

 TF Splicer is sold under very competitive price.

The big difference from competitor’s products is patent-protected special design in central part of TF Splicer.  No competitive products exist today who do not use any special tools to connect.

Contact Person: Mr. Frank Huang

Mobile;+886-988-238-989

Email:frank88.huang@gmail.com