NANOPROTECH - Innovative technology - Test in water


NANOPROTECH - Innovative technology - Phone in water


  

  

 

奈米防護產品   電路板防水及絕緣應用 (Protection of Electronic board)

 

 奈米防護產品   電路板防水及絕緣應用 (Protection of Electronic board)

 

NANOPROTECH Electric

 

NANOPROTECH Electric also is used for protection of electronic components and devices in dump environment.

 

NANOPROTECH Electric restores and increases electric conductivity of metal and has excellent surface grip even in case of significant temperature change. The product was developed specially for sensitive electronics. NANOPROTECH Electric has a long-term action and excellent cleansing effect. The product has a good compatibility with various materials such as copper, polyvinyl chloride, solders, electric and electronic details.

 

Purpose of NANOPROTECH Electric

 

protects electronic devices, microchips and printed circuits against moisture (steam, condensate water, rain, chlorinated and salt water etc.)

 

restores working capacity and electric conductivity of electronic components, circuit plates and the equipment damaged by humidity

 

protects against short circuit, malfunction and breakdown of equipment

 

increases service life of electronic devices, circuit plates and equipment

 

Properties of NANOPROTECH Electric

 

builds water proof and water repellent coating;

 

can be applied on wet surfaces;

 

protects against static electricity, dust and dirt;

 

fills in microscopic cavities on the surface;

 

provides electric conductivity in water;

 

provides dielectric strength of conductors;

 

builds insulating coating,

 

protects against surface current leakage;

 

maintains high elasticity;

 

does not cause harmful effects and does not destroy metals, plastic, rubber, glass, varnish, colors, ceramics and electric engines;

 

Functions of NANOPROTECH Electric

 

protects electronic devices against moisture (steam, condensate water, rain, chlorinated and salt water etc.).

 

increases service life of the electronic devices and equipment

 

restores, safes and improves the insulation resistance of electric equipment in dump environment

 

restores working capacity and electric conductivity of electronic components and devices damaged by humidity (oxidation and corrosion);

 

prevents from short circuits and contact freezing

 

protects against insulation breakdown

 

improves dielectric conductivity of electric connections

 

protects against surface current leakage;

 

protects against oxidation, mildew and fungi on electric contacts;

 

eliminates soot, carbon deposit and dirt;

 

facilitates the start of electric equipment after washing;

 

cleans and protects the contacts of electric equipment against dust and dirt

 

Tests of NANOPROTECH Electric

 

 

 

Test 1

 

Test A

 

Printed boards were immerged into water. Then the boards were hung for 2 minutes to let water to flow from them. The following examination showed that 80 percent of the boards lost working capacity. After that, the non-working boards were applied with NANOPROTECH Electric.

 

Result: 60 percent of the non-working boards restored working Capacity

 

 

 

Test B

 

New printed boards were applied with NANOPROTECH Electronic before being immerged into water. After immerging, the boards were hung for 2 minutes to let the water to flow from them, and then they were examined.

 

Result: Printed boards saved 100 percent of working capacity.

 

 

 

Test 2

 

Five out of ten printed boards were applied with water proofing

 

NANOPROTECH Electric. The boards were being sprayed with salt water for 2 hours twice a day and then they dried for 10 hours. In 2 weeks, the working capacity of the printed plates was tested.

 

Result: Printed boards that were not applied with NANOPROTECH became defective. Applied with NANOPROTECH printed plates saved working capacity.

 

 

 

 奈米防護產品   電路板防水及絕緣應用 (Protection of Electronic board)

 

Printed board was not applied with NANOPROTECH. Significant oxidation developed during 2 weeks of spraying with salt water.

 

 奈米防護產品   電路板防水及絕緣應用 (Protection of Electronic board)

 

Printed board was applied with NANOPROTECH. Soldering points were not damaged by corrosion. Working capacity was maintained..

 

Composition of NANOPROTECH Electronic:

 

The product is composed of highly refined mineral oil, intense anticorrosion additives, antioxidants, dearomatized paraffin and naphthene hydrocarbons. The product does not contain rubber, silicone,

 

acryl, tetrafluoroethylene and benzol.

 

 

 

Usage and storage:

 

NANOPROTECH should be kept away from open fire and direct sunlight.

 

Use the product in ventilated places. Do not smoke near the products and keep out of electrical discharge.

 

Please adhere to the storage regulations of liquids under pressure.

 

 

 

Toxicological information

 

NANOPROTECH does not irritate skin. Spray can cause an irritation of eyes and reversible damage. The product does not provoke allergic reactions.

 

 

 

Application of NANOPROTECH Electric

 

Shake the aerosol can before use. Spray 20-30 cm away from the surface.

 

Wait for 15 minutes before using an electric appliance.

 

 

 

Product data:

 

Packing type: aerosol can

 

Volume: 210 ml

 

Product consumption: 50 ml/m3

 

Shelf life: 5 years

 

Protection time: 1 year

 

Made in Russia

 

 奈米防護產品   電路板防水及絕緣應用 (Protection of Electronic board) 

 

Technical details

 

Form

Liquid

Color

Whity brown

Smell

Inherent to oils

Condition changes:

melting temperature/melting range

boiling temperature/ boiling range

burning temperature/burning range

 

Not determined

> 100°С

> 250°С

Self-ignition

Material does not self-ignite

Explosion risk

Material is not explosive.

Nevertheless, formation of explosive

air or steam mixtures is possible

Critical values for an explosion:

low value

high value

 

0.8 Vol. %

7.7 Vol. %

Density at 20ºC

< 0.8 g/cm³

Dissolvability in water/ mixability with water

 

Material does not dissolve in water

and does not mix with water

Kinetic viscosity at 20ºC

About 30 Stokes (DIN 53211/4)

Dielectric strength

208 kV at the distance of 1 cm

11.7 kV at the distance of 0.25 cm

Dissolvent content:

organic dissolvents

VOC (volatile organic components) EC

VOC (volatile organic components) EC

Water

 

About 30 Vol. %

180.0 g/l

30.0 %

0 %

 

 

 

 聯絡人:  黃先生 0988-238989

Email :  frank88.huang@gmail.com

 

 

 

 

        汽車奈米防護產品 (絕緣 潤滑 防鏽)

 汽車奈米防護產品 (絕緣 潤滑 防鏽)

產品用途

—絕緣-保護電氣設備不受溼氣影響,防止短路及漏電產品具有優異的防水絕緣性能。
—潤滑-能提供金屬長期而有效地潤滑效果,保護並減少其磨損及發出嘎吱聲、能防止表面結冰,到-80°C160°C都有效。
—防鏽-為金屬提供長期抗鏽蝕的防護,可以有效隔離所有形式的水氣,產品具有極高的附著力。
 
 
使用方式
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
 
 
 電鑽防水 展示影片網址:
 
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
—簡單的噴灑動作,便可形成保護膜
—當產品接觸到設備表面時,會立即滲透,並將最細微且易受水分子侵入的孔隙填滿。
—優異的毛細效應,迅速擴散形成防護薄膜。
—高附著性,即使需防護的設備表面已經是濕的,防護效果依然完全不打折!
 
絕緣產品應用
 
—為各種電器設備提供預防保養和維修恢復的功能如:點火線圈、高壓電線、電池端子、行車電腦、各種接頭、保險絲盒、風扇、發電機、起動器、電鎖、電動窗、雨刷馬達、冷卻系統等
—形成的防護層能大幅增加受保護電器的絕緣電阻
—成分對人體健康及環境完全無害,絕不會對金屬、塑料、橡膠、玻璃、塗料、陶瓷、電機等造成不良影響
—產品防護效力長達一至三年
 
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
 
 
潤滑產品應用
—為各種活動關節提供預防保養、維修恢復的功能如:   車輪螺栓、螺母和其他螺紋連接機制、車鎖、車門、後車箱、以及難以用人手觸及的機械裝置
—產品防護效力長達一至三年
—成分對人體健康及環境完全無害,絕不會對金屬、塑料、橡膠、玻璃、塗料、陶瓷、電機等造成不良影響
 
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
防鏽產品應用
—車內所有的物體表面、車底盤、車窗、車門、螺栓、鉸練、車廂及後車箱、各種轎車與卡車的引擎箱、排氣管、閥門
—建議產品可以在淡季的時候,作為設備的維護保養之用產品防護效力長達一至三年
—成分對人體健康及環境完全無害,絕不會對金屬、塑料、橡膠、玻璃、塗料、陶瓷、電機等造成不良影響
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
汽車奈米防護產品 (絕緣 潤滑 防鏽)
 
聯絡人: 黃先生 0988238989
創作者介紹

鼎龍科技有限公司 AdapterNetworks

adapternetworks 發表在 痞客邦 PIXNET 留言(0) 人氣()