Fiber Optics and Custom Solutions

< Fiber Splicing >    Patent Design

Quick Assembly Connector (No Tool) 

Quick Assembly Connector no-tool.jpg 

BroField’s Quick Assembly Connector (also named “No-Polish Connector” , “Pre-polish Connector” or Fast Connector”) is an easy-to-install device. No tool or jig is required.  It is universal for 250um / 900um / 2.0mm / 3.0mm / Flat Cable.

 

With BroField patent, it was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately.    This is an ideal solution, either for outside plant or inside a building.

 

Features:                                     

Universal for 250um / 900um / 2.0mm / 3.0 mm / Flat Cable.

Pre-polished connector

No epoxy required

No Tool or Jig required

Transparent body for immediate connecting  

confirmation  

30 seconds for connecting

Mean Insertion Loss 0.1 dB

Releasable after connecting  

Customization for other fibers

 

 

 

 Specifications:

Cable Siz e

250um / 900um / 2.0mm / 3.0 mm / Flat Cable

Assemble Time

30 seconds (after preparing fiber ends)

Insertion Loss (dB), Typical

0.1

Return Loss (dB), Typical

-50

Pull Strength (kgf), Typical

0.5kgf (900um); 6kgf (3.0mm); 1kgf (Flat Cable)

Operating Temperature ()

-40 ~ +70

Materials

Engineering Plastics & Index matching gel

 

  

Purchasing Information:

Part number

Description

Housing Color

QSC-09

SC Quick Assembly Connector SM

Blue

QSC-50

SC Quick Assembly Connector MM 50um

Beige

QSC-62

SC Quick Assembly Connector MM 62.5um

Beige

N/A

SC Quick Assembly Connector (Customization for other fibers or housing colors)

N/A

*Each pack contains 0.9 tube.    2.0 tube and loose tube for 250um is not in standard pack but under request.

 Contact Person: Frank Huang   0988-238-989

Email : frank88.huang@hotmail.com

創作者介紹

鼎龍科技有限公司 AdapterNetworks

adapternetworks 發表在 痞客邦 PIXNET 留言(0) 人氣()