USB Extender

UE-198FT is an extender between USB device and host(computer)with embedded into connector “intelligent” integrated circuits on both sides of the extender.
The USB extender with the chip inside is not a passive extender. It is an active device. The USB signals going in and out of this extender in both directions are buffered to assure signal quality. Unlike passive USB extender the IC prevents signal degradation. The embedded “intelligent” integrated circuit cleans, amplifies USB signal and watches USB 1.1 protocol. Its Control State Machine enables and disables USB and Cable transmitters inside the chip depending on USB signals.

Fully compliant with USB 1.1 specification;
 supportS for any full-speed ( 12 Mb/s ) or low-speed ( 1.5 Mb/s ) USB devices.
 Allows a USB device to have its cable length extended up to 198Ft.
 Embedded USB 1.1 Transceivers prevents signal loss.
 Low cost in comparison with extension of cable using Hubs or other USB extender.
 No software driver required.
 USB LED extinguished when there is no sufficient drawn current to carrysignals, using optional power adapter for external power supply.

 Surveillance camera
 Printer
 Scanner
 Mouse
 Keyboard
 MP3 Player
 Etc.
System Requirements:
Windows 98SE/ME/2000/XP;
 Mac OS 9.X/10.X;
 One available USB Port;
Package Contents:
Master Unit with 1 Feet Cable attached;
Remote Unit with LED indicator;
Power Adapter(AC/DC, Output:5V / 2A)(Optional);

Local Unit Upstream Port USB Type A Male
Downstream Port RJ45 Jack
Remote Unit Upstream Port USB Type A Female
Downstream Port RJ45 Jack
Built In Cable Length 1 Feet
Interconnect Cable Standard Category-5/5e/6 Network Cable
Max Cable Length 198 Feet
Supply Current Drawn 20 mA
Operating Temperature 0°C~40°C

Contact Person: Mr. Frank Huang

Mobile: +886-988-238-989



鼎龍科技有限公司 AdapterNetworks

adapternetworks 發表在 痞客邦 PIXNET 留言(0) 人氣()